Jump to content
Sign in to follow this  
TORMENTiUM

1994 RPS13 180SX

Recommended Posts

Hi guys, this is my 1994 Nissan RPS13 180sx, have been building it for the last 3 years off an on, mostly off haha, but have decided to get it finished an road legal in new zealand again.

 

Engine/Engine Bay

- 100km from Japanese spares blacktop sr20det

- Sinco top mount

- Sinco pipping

- Sinco Re circ system

- Sinco Catch can

- Sinco modified apexi 3.35inch exhaust, apexi cannon for street, Sinco twin pipes for track

- DSR 430 turbo

- TiAL 38mm mvs watercooled wastegate

- TiAL 50mm bov

- Mild porting(flapper wheel)

- Red Anodized Pulleys

- Metal headgasket

- Oil filter relocation kit

- Greddy style winged sump, holds 6.5 liters of HKS Racing oil

- Greedy style plenum

- ID1000cc Injectors

- HKS copy fuel rail

- Xtreme Heavy duty racing clutch

 

Wheels/Suspension

- BC golds

- Work meister Reps, 17x9 15p

- Front castor arms

- Hardrace rear upper camber arms

- Hardrace rear traction arms

- Hardrace rear toe arms

 

Interior

- Sinco half cage

- NZKW pair of fixed bucket seats

- Sylvester 3 inch 5 point racing harness

- HKS Boost gauge

- HKS type 0 turbo timer

- Nismo White gearknob

- Custom Carbon fibre panel

 

Fuel system

- Walbro intank 500hp

- Bosch 044 fuel pump

- 2.5 litre surge tank

- Tomei type s fuel reg

- Tomei Gauge

 

NEXT ON THE PLANS;

Get the fabrication finished then get a new ecu, would love a d-jetro power fc but they are hard to find for my engine an harder to get in new zealand, going offshore would be the best bet to secure one, either that or a link ecu. looking for a modest 250rwkw i will be happy with that, then to be road registered again an who knows my rb30 block will be next haha ;)

 

Any comments/flames or suggestions are welcome. cheers

 

post-149278-0-40387400-1392675760_thumb.jpg

Surge tank setup all done

post-149278-0-40307000-1392675780_thumb.jpg

Custom adapter, was cheaper to machine one than buy a tomei one

post-149278-0-81250200-1392675793_thumb.jpg

How the engine looks at the moment, the fuel rail is no good so sinco will make a custom one for me an have the fuel presure regulator coming off that

post-149278-0-91972400-1392675797_thumb.jpg

Wound the bc golds as low as they could go in the rear, then brought rear arms to bring wheels back out

post-149278-0-60318600-1392675799_thumb.jpg

The seats an cage, its all black on black, like to keep it simple

post-149278-0-54791900-1392675823_thumb.jpg

This is how the engine was before i started to do fuel an intake, was fresh from sinco customs

post-149278-0-60218100-1392675837_thumb.jpg

Side view of the intercooler an radiator setup

 

Video's:

Start up an engine view:

 

Walk around from twin pipes:

 

First test drive, found a few bugs:

 

Second test drive, 10psi twin pipes an screamer:

 

Third test drive, 10psi no screamer an apexi canon on:

Edited by TORMENTiUM

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

Sign in to follow this  

×