Jump to content
Sign in to follow this  
MINGEMONSTER

RB30 into S13 Silvia Help!

Recommended Posts

Hey guys new here, Ok done my best to scour this site for all information needed please dont tell me just to 'chuck a sr20det' in it as this is the engine ive decided to stick with since we had most of the stuff available and cheap to do for a project not after huge power (yet, turbo is the long term plan) and i know about the bonnet clearance issue but im sure I can get it to fit. (sitting it low, maybe a custom bonnet mould or foward facing plenum?)

 

So far this is the shopping list:

 

R31 donor car

A31 cefiro/R32 crossmember

Ford Cortina mounts

'C' stamped gearbox crossmember

R32 radiator

whitline sway bar

 

tailshaft ?!?!?!

diff???

 

Weld up a bash plate to protect my low sump a good idea?

 

 

 

I'm also pretty handy on a welder so I dont mind cutting and welding If thats whats needed to make this project cheaper/easier

 

Is there anything else I'm missing???

 

Possible to keep A/C? (lol)

 

Thanks in advance I'll make a build thread when i get this project underway

Share this post


Link to post
Share on other sites

tailshaft: S13 Manual shaft.

 

Diff: Anyone will bolt up. im running a 4.3 ratio r200

Share this post


Link to post
Share on other sites

big clearance issue as you have a clearance issue with the 25 and the 30 is 4cm higher, yet yeah r32 xmemeber, means a 32 or 31 manual box will bolt in with stock s13 tailshaft, c stamped xmember for box, and theres a range of mounts you can you, then a custom whiteline swaybar or a a31 swaybar, r32 radiator fits all good. all bolt in really, just the bonnet is the only real issue you will have

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

Sign in to follow this  

×