nitsab
-
Content count
1,076 -
Joined
-
Last visited
-
Got any pics? Depends how it is wired in, but you could probably just pull it out and tape up the wires and that’s it. Surely there is a connector on the back or something you could unplug to see what happens?
-
180sx: One headlight goes up and the other is down when lights are on
nitsab replied to HAS's topic in Car Audio & Electrical
So what happens if you manually wind up the problematic side? I’m guessing it resets to the issue once you turn lights on again? -
Where can I find this interior "cap"?
nitsab replied to fiberc's topic in Nissan Silvia (nissansilvia.com)
Yea you are probably going to have to buy the entire plastic section below the cluster. Pretty hard to find these parts separately these days, they aren’t worth anything so people just chuck em, I have been trying to find plastic steering wheel trim for years now and I can get it without purchasing the entire wheel -
You probably wont be able to see ant cracks on the spot welds when you don’t have the pedal engaged and the welds pretty much just split apart. However push down on the clutch and the entire bracket will bend like a banana if the welds are blown. Fun fact - Replacing the bracket is a surprisingly painful. Good luck.
-
Unfortunately I can’t help; but kinda interested why you are after short car stands?
-
Sold
-
Don't happen to have the standard type x steering wheel do you?
-
Hey man, sorry I have been AWOL for a while. Just sent you a pm, would be good to park up with another NS guy. Who are holding holding the happy laps and how can I get in on it ha.
-
Yea i believe there is a show and shine with happy laps, first in best dressed in these morning for spots.
-
Send me a pm if you decide to part out.
-
Good to see some guys going from here. Time attack is more my thing so I will be going along sat, think it might also be possible to do happy laps so that would be good.
-
Hey guys, Just thought I would see if anyone else is going to japs Nats this month?
-
Dinner with Pyro & Cheddar - Thursday Night!
nitsab replied to pyro's topic in Australia - Queensland
Hey man! It's been ages, I haven't seen anyone in years, so would love to come along for a catch up. -
I had this issue recently, took the pads out and it seemed as though pressure wasn't being applied evenly for some reason as one end of the pad was almost worn through and the other end had almost full pad left. This may be for different reasons that your issue though, mine went away when I replaced the pads for new ones.
-
Hey guys, thanks for all the awesome info. Have since looked into some of these tyres. I am running 17x8 +32 with 15mm spacer, so need to 215/45 on the front to be legal and basically fit. RS3 - apparently they are completely out of stock of virtually anything Archillies 123 - only make them in 235/45 NT01 / 05 - out of stock of 215/45 RE11- these seem way to expensive? Although haven't confirmed a price yet