Jump to content

MoB

Platinum Member
  • Content count

    769
  • Joined

  • Last visited

Community Reputation

2 Neutral

About MoB

  • Rank
    Gold Member

Contact Methods

  • MSN
    s14.5_s2@hotmail.com

General Info

  • Location
    Australia SA
  • Gender
    Male
  • Car Type
    Nissan Silvia
  • Car Model
    R33, 13BTT 86, JZ30
  1. Price : $2,900 Condition : Used Selling a full set of WEDS TV-X BVILLENS 18x10 +10 front and rears As majority of WEDS wheels these were made to my desired specifications from the factory in Japan and weren't cheap! The centres are gun-metal grey with heavy ice pearl and slight bronze! They have original WEDS valve caps also! Not a common wheel you see compared to the flooded market of vskf, vs, eurolines etc Hence why I chose these, very street able yet not to aggressive on the eye! Lets face it wheels make or break your car these are so worth it! I'm asking $2900 I don't get on here as much as I used to so contact me directly 0413203396 Can post interstate at buyers expense http://www.gumtree.com.au/s-ad/mawson-lake...0-10/1029751740
  2. Price : $2,900 Condition : Used Selling a full set of WEDS TV-X BVILLENS 18x10 +10 front and rears As majority of WEDS wheels these were made to my desired specifications from the factory in Japan and weren't cheap! The centres are gun-metal grey with heavy ice pearl and slight bronze! They have original WEDS valve caps also! Not a common wheel you see compared to the flooded market of vskf, vs, eurolines etc Hence why I chose these, very street able yet not to aggressive on the eye! Lets face it wheels make or break your car these are so worth it! I'm asking $2900 I don't get on here as much as I used to so contact me directly 0413203396 Can post interstate at buyers expense http://www.gumtree.com.au/s-ad/mawson-lake...0-10/1029751740
  3. Price : $2,000 Condition : Used R154 gearbox from jzx100 Exedy clutch has meat left from jzx100 Pressure plate from jzx100 Pedal box from jza80 supra Clutch master cylinder from jza80 supra Slave cylinder from jza80 Selling due to lost interest and have one to many project to finish All you need to complete this kit is a flywheel and tailshft this all cost me over 2500 because I sourced the parts individually! $2000 I'm not on here anymore Call or txt no shit talk genuined buyers only please 0413203396
  4. Price : $3,500 Condition : Used Item: Weds Kranze LXZ 18x10 -16 18x11 -26 Condition: Brand New not a scratch! Comments: Bought them for my GS300 but selling the car due having a company vehicle so there for no need for these puppies, in no rush to sell these so dont bother low balling! Price: $3500 considering i paid 4k Location: Adelaide, South Australia SOLD
  5. Gym's in SA

    Curves in shit house, my gf went there for a few months the crap id hear lol its just like a circuit that you do so she went to Fernwood for about 2 years now an loves it an takes alot of classes
  6. Graffiti Guard

    looks ghetto if you do the one, did it on my skidder looked tough but make sure the entire guard is done and it all blends too bad i have no pics but ill see what i can dig up!
  7. http://www.karmaloop.com/ The effing shit!!
  8. Seeking Plumbing Apprenticeship

    Ahh well done where you work ben?
  9. Ahhhhhh sooooooo keen but im selling my skidder! maybe ill keep it till this date lol
  10. Looks thug!! i like! Welcomes
  11. LPG with oxy as it a cheaper way of heating steel than acetylene but its not great for cutting and requires different gauges for the gas and cutting/heating tips? so unless you use it often there's not much point? LPG / Air softest heat - paint scraping etc LPG / Oxygen soft heat - lead wiping / soldering / pre heating but with specific cutting tips - steel Acetylene / Oxygen - general brazing and silver soldering , cutting. Hydrogen / Oxygen - Glass blowing and Jewelery work used for maximum heat but also for cleanest fuel with least impurities. Exactly! a windy day will just blow LPG out lol seriously it actually does when your trying to braze 25mm copper theres not enough heat, last company i worked for were using it, im planning on giving supagas a call been to busy
  12. cheapish as in how much? i shall ring up on Tuesday
  13. So its late at night was looking through my dockets notice how much i pay for oxy and acetylene Currently with BOC there rates for the year are $280 for oxy and acetylene then i just refilled the acetylene which is the size D bottle on Thursday last week cost $87 f**k oath thats expensive! anyone with someone like liquidair or supagas? they any cheaper? Help a brother out! Anthony
×